Applications have been lodged for the revocation of the Tariff Concession Orders below:
ALUMINIUM PROFILES, extruded, conforming to Australian Aluminium Specification 7005 T593 (AAS 7005 T593), having ALL of the following:
(a) minimum cross sectional dimension NOT less than 6 mm and NOT greater than 450 mm;
(b) minimum ultimate tensile strength NOT less than 350 MPa;
(c) minimum yield tensile strength NOT less than 300 MPa
TC 1331293
ALUMINIUM EXTRUSION PROFILES, produced with alloy ENAW-5005A (ENAW-AIMg1C) having ALL of the following:
(a) minimum cross sectional dimension of NOT less than 6 mm and NOT greater than 450 mm;
(b) alloy chemical composition by percentage weight of ALL of the following:
(i) iron NOT exceeding 0.45%;
(ii) silicon NOT exceeding 0.3%;
(iii) manganese NOT exceeding 0.15%;
(iv) chromium NOT exceeding 0.1%;
(v) copper NOT exceeding 0.05%;
(vi) magnesium NOT less than 0.7% and NOT greater than 1.11%;
(vii) zinc NOT exceeding 0.2%
(viii) other impurities NOT exceeding 0.15%;
(ix) remainder Al
TC 1335698
If you are currently importing the above goods you may consider applying for a new Tariff Concession Order.
Importations not covered by in-transit provisions may be subject to post action as any decision to revoke an order is backdated to the date of request for revocation.
If you are affected by the application for the revocation of the above TCO and would like Saving Point to review your case, please contact us on 03 9555 3551 or [email protected]
